This website contains adult material and is only suitable for those 19 years or older. Click Enter only if you are at least 19 years of age.or Exit
Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website at www.surreyvapes.com
Beautiful yet more powerful, the iStick TC60W is a newly upgraded device sustaining the smart technology of temperature control. Not only does the iStick TC60W support Nickel 200 coil in TC-Ni mode and Titanium coil in TC-Ti mode, it also delivers a satisfying amount of vapor at 60W maximum output.
How to Use
Note: In TC-Ni/TC-Ti mode, please make sure the coil is at room temperature when first used with the iStick TC60W.
(Note: Please lock the resistance when the coil is at room temperature so that the device can display the correct “base resistance”. In lock mode, when you remove the coil and then put it back, the device can maintain the same “base resistance” although the coil resistance may increase due to the rise of temperature. In unlock mode, when you remove the coil and then put a coil back, the screen may display “New coil up same down” as the coil resistance may increase within certain range. If it is the same coil,
press the downside of the adjustment bottom and if it is a new coil, press the upside of the adjustment button. But please unlock the resistance when you want to change an atomizer of different resistance.)
How to replace the front and back panels:
How to charge:
The battery power indicator on the screen will keep flashing when the remaining power is less than 10%. iStick TC60W can be charged through USB port at the bottom via 1A wall adapter. The battery indicator will keep flashing during charging and the screen will go out when fully charged.
Atomizer Protection: When vaping time exceeds ten seconds, the output shuts off automatically with “Over 10s” display on the screen.
Atomizer Short-circuit & No Atomizer Protection: When atomizer short-circuit occurs, the OLED screen will display “Atomizer Short”. The screen will display “No Atomizer” when there is no atomizer
Low-voltage Protection: When the voltage of battery is below 3.3V, the OLED screen will display “Lock”. Charge the battery to unlock the device.
Temperature Protection: In TC-Ni/TC-Ti mode, if the actual temperature of coil is higher than the set temperature, the screen shows "Temp Protection".
Temperature Alert: If the temperature of device is over alert temperature, the output will shut off automatically and the screen will display “Device Too Hot”. You can continue to vape after it cools down.
On the magnetic front panel, there are two silkscreen markers named “Eleaf TM” and “iStick TC60W”.
1. Only have your iStick TC60W repaired by Eleaf. Do not attempt to repair the unit by yourself as damage or personal injury may occur.
2. Do not leave the iStick TC60W in high temperatures or damp conditions, otherwise it may be damaged.
The appropriate operation temperature is within 0ô€‚¥to45ô€‚¥ while charging and -10 to 60(Degree Celsius) while using.
3. Do not attempt to combine the iStick TC60W with parts from other brands of e-cigarettes. If it is damaged in this way, our company will not take on responsibility and your warranty will be void.
We are not responsible for any damages caused by human error. Legal warranty is applied.
Product Introduction AIMIDI ETALIENS E.T-X3 DNA 75 Box Mod is made from Aluminum and Zinc Alloy. The Mod is the evolution of E. T-X2’s highly considered box mod line-up, integrating...
Product Introduction The Aspire Breeze is an all-in-one device that employs a compact and ergonomic design. It has a built-in refillable tank that holds 2ml of e-juice and is compliant with TPD regulations....